toolbox/perform-pre-gc-linking.sh

   1 #!/bin/sh
   2
   3 # Perform pre-gc linking of packs and objects to forks
   4
   5 # It may, under extremely unusual circumstances, be desirable to run git gc
   6 # manually.  However, running git gc on a project that has forks is dangerous
   7 # as it can reap objects not in use by the project itself but which are still
   8 # in use by one or more forks which do not have their own copy since they use
   9 # an alternates file to refer to them.
  10 #
  11 # Running this script on a project BEFORE manually running git gc on that
  12 # project prevents this problem from occuring.
  13 #
  14 # Note that a .nogc file should really be created during the manual gc
  15 # operation on a project!
  16 #
  17 # Alternatively, if a project is to be removed but its forks are to be kept
  18 # then this script MUST be run before removing the project so as not to corrupt
  19 # the forks that will be kept.
  20 #
  21 # Before the new order of gc came along this script did various things to
  22 # try and optimize what it hard-linked down into the forks.  Now, however,
  23 # it just hard-links all packs and loose objects down since with the new order
  24 # both packs and objects could end up going away.
  25 #
  26 # This technique is not as optimal as the prior version, but with the advent
  27 # of the new order for running gc and the ability to trigger/force a Girocco gc
  28 # on a project using the "projtool.pl" command there's really no legitimate
  29 # reason to use this script anymore other than when keeping the forks of a
  30 # project while discarding the project itself.
  31 #
  32 # In that case all packs and objects must be hard-linked down to the child
  33 # fork(s).  That functionality is all that remains in this script.  It accepts
  34 # and ignores the previous options (for backwards compatibility) and just
  35 # always does that now.
  36 #
  37 # The single mode of operation makes maintenance of this script easier too.
  38
  39 set -e
  40
  41 . @basedir@/shlib.sh
  42
  43 umask 002
  44
  45 force=
  46 while case "$1" in
  47         --help|-h)
  48                 cat <<EOT; exit 0;;
  49 Usage: $(basename "$0") [option ...] <project-name>
  50        --force          Run even though no .nogc or .bypass file present
  51        --single-pack    Ignored for backwards compatibility
  52        --include-packs  Ignored for backwards compatibility
  53        <project-name>   Name of project (e.g. "git" or "git/fork" etc.)
  54 Always hard-links all packs and all loose objects down to forks.
  55 EOT
  56         --force)
  57                 force=1;;
  58         --single-pack|--include-packs)
  59                 ;;
  60         --)
  61                 shift; break;;
  62         -?*)
  63                 echo "Unknown option: $1" >&2; exit 1;;
  64         *)
  65                 ! :;;
  66 esac; do shift; done
  67
  68 proj="${1%.git}"
  69 if [ "$#" -ne 1 ] || [ -z "$proj" ]; then
  70         echo "I need a project name (e.g. \"$(basename "$0") example\")"
  71         echo "(See also help -- \"$(basename "$0") --help\")"
  72         exit 1
  73 fi
  74 if ! cd "$cfg_reporoot/$proj.git"; then
  75         echo "no such directory: $cfg_reporoot/$proj.git"
  76         exit 1
  77 fi
  78 apid=
  79 ahost=
  80 { read -r apid ahost ajunk <gc.pid; } >/dev/null 2>&1 || :
  81 if [ -n "$apid" ] && [ -n "$ahost" ]; then
  82         echo "ERROR: refusing to run, $cfg_reporoot/$proj.git/gc.pid file exists"
  83         echo "ERROR: is gc already running on machine '$ahost' pid '$apid'?"
  84         exit 1
  85 fi
  86
  87 if [ -z "$force" ] && ! [ -e .nogc ] && ! [ -e .bypass ]; then
  88         echo "WARNING: no .nogc or .bypass file found in $cfg_reporoot/$proj.git"
  89         echo "WARNING: jobd.pl could run gc.sh while you're fussing with $proj"
  90         echo "WARNING: either create one of those files or re-run with --force"
  91         echo "WARNING: (e.g. \"$(basename "$0") --force ${singlepack:+--single-pack }$proj\") to bypass this warning"
  92         echo "WARNING: please remember to remove the file after you're done fussing"
  93         exit 1
  94 fi
  95
  96 # date -R is linux-only, POSIX equivalent is '+%a, %d %b %Y %T %z'
  97 datefmt='+%a, %d %b %Y %T %z'
  98
  99 trap 'echo "hard-linking failed" >&2; exit 1' EXIT
 100
 101 if has_forks_with_alternates "$proj"; then
 102
 103         # We have to update the lastparentgc time in the child forks even if they do not get any
 104         # new "loose objects" because they need to run gc just in case the parent now has some
 105         # objects that used to only be in the child so they can be removed from the child.
 106         # For example, a "patch" might be developed first in a fork and then later accepted into
 107         # the parent in which case the objects making up the patch in the child fork are now
 108         # redundant (since they're now in the parent as well) and need to be removed from the
 109         # child fork which can only happen if the child fork runs gc.
 110
 111         # It is enough to copy objects just one level down and get_repo_list
 112         # takes a regular expression (which is automatically prefixed with '^')
 113         # so we can easily match forks exactly one level down from this project
 114
 115         forkdir="$proj"
 116         get_repo_list "$forkdir/[^/:][^/:]*:" |
 117         while read fork; do
 118                 # Ignore forks that do not exist or are symbolic links
 119                 ! [ -L "$cfg_reporoot/$fork.git" ] && [ -d "$cfg_reporoot/$fork.git" ] ||
 120                         continue
 121                 # Or have an empty alternates file
 122                 ! is_empty_alternates_file "$cfg_reporoot/$fork.git/objects/info/alternates" ||
 123                         continue
 124                 # Match objects in parent project
 125                 for d in objects/$octet; do
 126                         [ "$d" != "objects/$octet" ] || continue
 127                         mkdir -p "$cfg_reporoot/$fork.git/$d"
 128                         find -L "$d" -maxdepth 1 -type f -name "$octet19*" -exec \
 129                                 "$var_sh_bin" -c 'ln -f "$@" '"'$cfg_reporoot/$fork.git/$d/'" sh '{}' + || :
 130                 done
 131                 # Match packs in parent project
 132                 mkdir -p "$cfg_reporoot/$fork.git/objects/pack"
 133                 list_packs --all --exclude-no-idx objects/pack | LC_All=C sed 'p;s/\.pack$/.idx/' |
 134                         xargs "$var_sh_bin" -c 'ln -f "$@" '"'$cfg_reporoot/$fork.git/objects/pack/'" sh || :
 135                 if ! [ -e "$cfg_reporoot/$fork.git/.needsgc" ]; then
 136                         # Trigger a mini gc in the fork if it now has too many packs
 137                         packs="$(list_packs --quiet --count --exclude-no-idx --exclude-keep "$cfg_reporoot/$fork.git/objects/pack")" || :
 138                         if [ -n "$packs" ] && [ "$packs" -ge 20 ]; then
 139                                 >"$cfg_reporoot/$fork.git/.needsgc"
 140                         fi
 141                 fi
 142                 git --git-dir="$cfg_reporoot/$fork.git" update-server-info
 143                 # Update the fork's lastparentgc date
 144                 git --git-dir="$cfg_reporoot/$fork.git" config gitweb.lastparentgc "$(date "$datefmt")"
 145         done
 146 fi
 147
 148 trap - EXIT
 149 echo "packs and loose objects for $proj have now been linked into child forks (if any)"